Hi everyone, Can anyone shed some light on how does the November 2020 recall software update affect what you see as estimated battery capacity shown in Torque Pro? The LT in question was purchased used at end of 2020, purportly with the November 2020 software update already applied. The 3rd...

I recently bought a used 2019 with the recall fix. I am really enjoying driving it, especially in L mode. I got a ODBII adapter and Torque Pro and made a log. Can someone let me know what PIDs I should log to try to calculate battery capacity and stability. Is "!Battery - Pack - Capacity kWh...

I felt like seeing how many kWh I could use before absolutely needing to charge. here are the results: I ended up traveling 256.2 miles and used 61.8 kWh. Using an EngineLink I could see I had (rounding) 2 percent battery life left. Assuming I started with 66 kWh, useable. ( I bought the car...

I am super excited to have purchased a used 2017 bolt EV with 70k miles on it, however I am a bit concerned now that I have been able to charge it fully. The range is currently 158 mi at a 95% charge. It is a nice 60 degrees Fahrenheit outside and all tires are at 42 psi. It will not charge...

I have just bought a certified 2017 Bolt and I believe I have a battery issue. I have only had the car for a week. After reading several threads and following my battery status for a week it seems my total kW used are off when compared to the battery percentage. Here is an example: Battery...

I wanted to tell you about an iPhone app I’ve written that you may find useful. It was developed really for the Volt, but two of its functions are also useful in the Bolt. - Afterblow: This function allows you to check the status of, and enable or disable, the Afterblow system built into your...