Chevy Bolt EV Forum banner
  • Hey Guest, welcome to We encourage you to register to engage in conversations about your Bolt.

Built a 2” receiver hitch

2253 Views 8 Replies 5 Participants Last post by  Chwkev
I installed a 2” receiver hitch last week. I decided to build one rather than buying one of the available options. I enjoy the fabrication process, but removing (multiple times) the rear bumper cover was somewhat stressfull. I don’t like the idea of all those little plastic clips/fasteners breaking as I try to figure out how to remove them. The receiver I built is similar to the Ecohitch by Torklift. I have 235mm of clearance under the receiver.


See less See more
  • Like
Reactions: 5
1 - 1 of 9 Posts
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.