Chevy Bolt EV Forum banner
1 - 20 of 23 Posts

·
Registered
2020 Chevy Bolt premier Cayenne Orange metallic
Joined
·
15 Posts
Discussion Starter · #1 ·
Following the info here: Trade Grills?

I was able to replace the grill in about 40 minutes taking my time being careful not to break anything.

I was able to get the parts through Courtesy Chevrolet in Phoenix Arizona. It only took a little over a week for them to get the parts.

The rest of the badging will get installed soon.
Car Plant Vehicle Grille Hood

Car Vehicle Daytime Grille Motor vehicle
 

Attachments

·
Registered
Joined
·
29 Posts
I have a fresh set of new front fender ampera e badges, left and right, $40 for the set.

I'm rebadging mine to a Honda. I'll release 3D printable STL files when I can finally find time to do the CAD work.
Sure would like to complete my conversion to OPEL with those "Ampera-E" fender logos.
Where did you source, and how are the badges exchanged and installed ?
 

·
Registered
Joined
·
710 Posts
Hood Automotive lighting Automotive tire Motor vehicle Vehicle

Sure would like to complete my conversion to OPEL with those "Ampera-E" fender logos.
Where did you source, and how are the badges exchanged and installed ?
The exchange is ugly. It's vicious double sided tape and delicate little clips. I tried but destructive removal seems to be the only way. Solvent is a no-no, or at least anything fast, since the black trim pieces that the badge sits in is ABS plastic, on the inside anyways, and does NOT like sticker remover. You might get away with isopropyl / ethyl alcohol soak, but it's going to be a long shot, and plus all the text and chrome of the badge is assembled with double stock tape too. Just rip them out.

Of course remove the black section of trim from the vehicle first. This is done by loosening the 7mm head hex screw that's located under the hood and then gently popping the trim off. There are lots of those little body attachment pegs and it's entirely possible that you'll break something if you are beastly about it. Then just push the badge off from the back and do your best not to completely destroy it and then scrape the old adhesive off and put the new one in. The actual trim pieces if you want to get the whole black piece are well north of $80 a pop plus shipping. Times two.

I see this work as something that's going to pay off long term. There's no way that GM is going to be able to redeem the Bolt name to anybody who believes that they're a true fire hazard. We'll just have to wait until the Chevy Jolt comes out with the Ultium batteries. Yeah that's right they're going to name it something just as stupid, don't worry.
 
1 - 20 of 23 Posts
Top