Nice, my son buggered ours up this winter getting stuck in a snow bank with ice chunks. May have to pull the trigger on one of these as we have terrible roads here.
-
Hey Guest, welcome to ChevyBolt.org. We encourage you to register to engage in conversations about your Bolt.
Metal skid plate for chevy bolt EV
I ordered this plate from a place called Kolchuga.
The one pictured is a special extra thick one that I special requested.
it actually fits and works very well. The installation is a bit tricky, but the fitment is basically perfect
i ended up trimming this part
![Wood Automotive exterior Hood Bumper Gas]()
Here is the old beat up 200k mile one
![Gesture Road surface Wood Asphalt Font]()
Here it is installed. Note that the floor jack is just resting there with no pressure as a fifth support point do not lift the vehicle there.
![Wood Tints and shades Automotive exterior Metal Composite material]()
I installed the back first. This seemed to work well. Not shown are brackets for the front part that attach to steering rack bolts. These were hard to install. Also note that it is possible to put the front most support bar (not pictured) in backwards. The 6 bolt holes aren’t symmetric. It only goes in one way
![White Light Automotive tire Line Wood]()
The one pictured is a special extra thick one that I special requested.
it actually fits and works very well. The installation is a bit tricky, but the fitment is basically perfect
i ended up trimming this part
Here is the old beat up 200k mile one
Here it is installed. Note that the floor jack is just resting there with no pressure as a fifth support point do not lift the vehicle there.
I installed the back first. This seemed to work well. Not shown are brackets for the front part that attach to steering rack bolts. These were hard to install. Also note that it is possible to put the front most support bar (not pictured) in backwards. The 6 bolt holes aren’t symmetric. It only goes in one way
